H3C GB0-381-ENU

In recent years, many people choose to take H3C GB0-381-ENU certification exam which can make you get the H3C certificate that is the passport to get a better job and get promotions.

How to prepare for H3C GB0-381-ENU exam and get the certificate? Please refer to H3C GB0-381-ENU exam questions and answers on ITCertTest.

ITCertTest is a good website that provides all candidates with the latest IT certification exam materials. ITCertTest will provide you with the exam questions and verified answers that reflect the actual exam. The H3C GB0-381-ENU exam dumps are developed by experienced IT Professionals. 99.9% of hit rate. Guarantee you success in your GB0-381-ENU exam with our exam materials.

Furthermore, we are constantly updating our GB0-381-ENU exam materials. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easy prepare for GB0-381-ENU exam and successfully pass your exam. You just need to spend you 20-30 hours on studying the exam dumps.

ITCertTest provides you not only with the best materials and also with excellent service. If you buy ITCertTest questions and answers, free update for one year is guaranteed. You fail, after you use our H3C GB0-381-ENU dumps, 100% guarantee to FULL REFUND. You just need to send the scanning copy of your examination report card to us. After confirming, we will refund you.

What's more, before you buy, you can try to use our free demo. We provide you some of H3C GB0-381-ENU exam questions and answers and you can download it for your reference.

ITCertTest is no doubt your best choice. Using the H3C GB0-381-ENU training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

Quick and easy: just two steps to finish your order. We will send your products to your mailbox by email, and then you can check your email and download the attachment.

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
rtb-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
rtc]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa no-import-route no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0
0.0.0.255
RTC-ospf-1]import-route direct
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2]network 4.4.4.4 0.0.0.0
rtd-ospf-1-area-0.0.0.2]nssa
Then _______ may be injected into the backbone area

A) Tpe5 LSA
B) Tpe3 LSA
C) Tpe4 LSA
D) Tpe7 LSA

2. In a certain network project, the customer considers that the network users may increase significantly in the future, so the network is required to have better scalability.
Which of the following measures can improve the scalability of the network?

A) Routing configuration using static routing
B) Routing configuration using RIP-1
C) Deploy data encryption between core and remote branches
D) Use the OSPF protocol and plan the network layered architecture

3. When the neighbor status checked by the displabgp peer command is Established, it means that ______ has been received from the peer.

A) Establish Message
B) Open Message
C) Update Message
D) Keepalive Message

4. The networking is as shown in the figure, eBGP runs between AS 100, AS 200, and AS 300, and ATM links between RTC and RTA, and RTC and RTB are connected. 2M line as backup, how to implement it on RTC?

A) RTC filters the MED attribute from BGP, the MED of the route learned from RTA is set to 200, and the MED of the route learned from RTB is set to 100
B) RTC filters all BGP routes learned from RTA and accesses AS 100 through AS 200
C) Adjust the BGP LP attribute on RTC, set the LP of the route learned from RTA to 100, and set the LP of the route learned from RTB to 200
D) No need to adjust BGP properties, RTC will automatically select the path with high bandwidth

5. In the following BGP networking application, an EBGP neighbor relationship is established between the three routers, in which RTA receives the Internet routes sent by RTB and RTC at the same time, so that it can reach the Internet 192.10.0.0/16 through two links.
The main configurations of RTA, RTB and RTC are as follows:
RTA]
bgp 700
network 190.10.0.0 mask 255.255.0.0
undo snchronization
group as500 external
peer as500 as-path-acl 1 export
peer 201.1.1.1 group as500 as-number 500
group as600 external
peer as600 as-path-acl 1 export
peer 160.1.1.1 group as600 as-number 600
ip as-path-acl 1 permit ^$
RTB]
bgp 500
network 192.10.0.0 mask 255.255.0.0
undo snchronization
group as700 external
peer as700 route-policsetmed export
peer 201.1.1.2 group as700 as-number 700
route-policsetmed permit node 10
applcost 50
RTC]
bgp 600
network 192.10.0.0 mask 255.255.0.0
undo snchronization
group as700 external
peer as700 route-policsetmed export
peer 160.1.1.2 group as700 as-number 700
route-policsetmed permit node 10
applcost 100
According to the above configuration, which router will the 190.10.0.0/16 network segment on the RTA access the 192.10.0.0/16 network segment through?
Which attribute of the BGP route determines the route preference principle through this router?

A) RTB , Router ID
B) RTC , Router ID
C) RTC, MED
D) RTB, MED

Solutions: