In recent years, many people choose to take HP HPE6-A80 certification exam which can make you get the HP certificate that is the passport to get a better job and get promotions.

How to prepare for HP HPE6-A80 exam and get the certificate? Please refer to HP HPE6-A80 exam questions and answers on ITCertTest.

ITCertTest is a good website that provides all candidates with the latest IT certification exam materials. ITCertTest will provide you with the exam questions and verified answers that reflect the actual exam. The HP HPE6-A80 exam dumps are developed by experienced IT Professionals. 99.9% of hit rate. Guarantee you success in your HPE6-A80 exam with our exam materials.

Furthermore, we are constantly updating our HPE6-A80 exam materials. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easy prepare for HPE6-A80 exam and successfully pass your exam. You just need to spend you 20-30 hours on studying the exam dumps.

ITCertTest provides you not only with the best materials and also with excellent service. If you buy ITCertTest questions and answers, free update for one year is guaranteed. You fail, after you use our HP HPE6-A80 dumps, 100% guarantee to FULL REFUND. You just need to send the scanning copy of your examination report card to us. After confirming, we will refund you.

What's more, before you buy, you can try to use our free demo. We provide you some of HP HPE6-A80 exam questions and answers and you can download it for your reference.

ITCertTest is no doubt your best choice. Using the HP HPE6-A80 training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

Quick and easy: just two steps to finish your order. We will send your products to your mailbox by email, and then you can check your email and download the attachment.

HP HPE6-A80 Exam Syllabus Topics:

Section	Weight	Objectives
Gather and Analyze Customer Requirements	9%	- Document constraints, assumptions, and success criteria - Perform gap analysis - Identify business and technical requirements
Produce Detailed Design Documentation	30%	- Bill of materials (BOM) and specifications - Implementation guidelines and assumptions - Detailed topology and component selection - RF coverage and capacity documentation
Plan and Design Aruba Solution	33%	- High-level architecture design - Network services, management, and monitoring - Scalability, redundancy, and high availability - RF planning and site survey principles
Evaluate Requirements and Select Technologies	20%	- RF and spectrum considerations - Compare VSF, VSX, EVPN-VXLAN architectures - Security and access control options - Aruba wired and wireless portfolio selection
Recommend and Present the Solution	8%	- Explain trade-offs and risk mitigation - Align design with business goals - Support phased deployment plans

HP Aruba Certified Design Expert Written Sample Questions:

Question 1

Refer to the exhibit.

A customer needs a wireless network upgrade and has these requirements.
- Support any applications used on a wired connection
- Support up to 2500 wireless clients
- Support seamless roaming from floor to floor and building to building
- Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?

A. Combine me /25 subnets for wireless and wired users into a /16 subnet.
B. Combine the /25 subnets for wireless users into a /20 subnet
C. Place each controller in a different VLAN and subnet.
D. Install additional Mobility Controller.

Question 2

Refer to the exhibit.

A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600 wireless guest devices The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.
What is one recommendation that the architect should make to ensure a successful deployment?

A. Add a wiring closet closer to the north side.
B. Use directional antennas to avoid lost signal.
C. Use at least CATS cable to connect to the APs.
D. Add about 10 APs to achieve adequate density

Question 3

A company has several remote sues that operate more or less autonomously. Each site has ns own local services and Internet connection However the company does have a main office with a few centralized resources that the company would like to make available to remote office employees over the Internet connection. Sites range in size and require between 10 and 20 APs.
The customer requires the most cost-effective solution that meets the requirements.
Which solution should the architect recommend for each remote site?

A. an IAP cluster with an IPsec tunnel to a main office MC
B. Campus APs (CAPS) with CPSec control channels to a main office MC
C. Campus APs (CAPs) with a local MC that has an SD-WAN license
D. Remote APs (RAPs) with IPsec tunnels to a main office MC

Question 4

A customer has an Aruba solution with APs, MCs, and an MM The customer also uses AirWave and ClearPass. The customer wants to add Aruba CX Switches, which use per-user tunneled node, to the solution.
How should the Aruba CX Switches integrate with the existing solution in order to determine when to tunnel device traffic to MCs?

A. They should be managed by AirWave with SNMPv3.
B. They should be directed to MCs by a DHCP or DNS server.
C. They should implement authentication to ClearPass.
D. They should be manually added as MDs in MM.

Question 5

A nospltai needs an upgrade to 802.11ax for its wireless network, which needs to provide complete coverage The hospital has a concrete exterior and uses drywalls lor all of the interior walls with a few exceptions as mandated for safety The building has 10fool (3 m) ceilings.
The hospital prefers to avoid the deployment of APs in rooms if possible. Exceptions include reception areas and lounges.
The wireless network must support wireless medical devices, voice communicators for medical star, laptops in nurse stations, medical staff tablets, and visitor and patient personal devices. All of these devices support both the 2.4GHz and 5GHz band.
The exhibits below show one wing of one floor of the hospital. This wing is about 2S.Q0D square feet {2GQQ sq, m). The unlabeled rooms along the bottom of the wing are patient rooms' other rooms such as lounges and the MR] room are labeled. This area has:
* up to SO concurrent patients and visitors, who might have up to two devices
* 40 concurrent staff members, who might have up to three devices
* about 200 medical and other types of wireless devices
The architect has already planned to place APs in stairwells on another floor.
Which AP plan for this wing of this floor meets the customer needs?
A)

B)

C)

D)