In recent years, many people choose to take HP HP0-Y37 certification exam which can make you get the HP certificate that is the passport to get a better job and get promotions.
How to prepare for HP HP0-Y37 exam and get the certificate? Please refer to HP HP0-Y37 exam questions and answers on ITCertTest.
ITCertTest is a good website that provides all candidates with the latest IT certification exam materials. ITCertTest will provide you with the exam questions and verified answers that reflect the actual exam. The HP HP0-Y37 exam dumps are developed by experienced IT Professionals. 99.9% of hit rate. Guarantee you success in your HP0-Y37 exam with our exam materials.
Furthermore, we are constantly updating our HP0-Y37 exam materials. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easy prepare for HP0-Y37 exam and successfully pass your exam. You just need to spend you 20-30 hours on studying the exam dumps.
ITCertTest provides you not only with the best materials and also with excellent service. If you buy ITCertTest questions and answers, free update for one year is guaranteed. You fail, after you use our HP HP0-Y37 dumps, 100% guarantee to FULL REFUND. You just need to send the scanning copy of your examination report card to us. After confirming, we will refund you.
What's more, before you buy, you can try to use our free demo. We provide you some of HP HP0-Y37 exam questions and answers and you can download it for your reference.
ITCertTest is no doubt your best choice. Using the HP HP0-Y37 training dumps can let you improve the efficiency of your studying so that it can help you save much more time.
Quick and easy: just two steps to finish your order. We will send your products to your mailbox by email, and then you can check your email and download the attachment.
HP HP0-Y37 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Migrating Distribution Layer - HP A-Series | 7% | - Feature migration order - Replace Cisco switches with HP A-Series |
| Rapid Ring Protection Protocol (RRPP) | 13% | - RRPP design and troubleshooting - RRPP functionality and deployment |
| High Availability Protocols | 15% | - Smart Link and Monitor Link - VRRP vs HSRP interoperability and migration |
| Advanced Routing Troubleshooting | 17% | - BGP4 configuration and optimization - OSPF, RIP, and static route troubleshooting |
| Network Troubleshooting Methodology | 16% | - HP CLI diagnostic tools - Systematic troubleshooting approach |
| Intelligent Resilient Framework (IRF) | 2% | - IRF configuration and operation - IRF split detection and MAD |
| Migrating Distribution Layer - HP E-Series | 13% | - Replace Cisco switches with HP E-Series - Migration strategies and downtime reduction |
| Migrating Cisco Networks to Open Standards | 17% | - Replace CDP, PVST+, VTP, EIGRP with LLDP, MSTP, GVRP, OSPF - Edge feature migration |
HP Migrating &Troubleshooting Enterprise Networks Sample Questions:
Question #1
What is a characteristic of load balancing in RRPP?
A. It is not possible to load balance with RRPP.
B. multiple RRPP rings within a domain
C. overlapping RRPP rings
D. multiple RRPP domains with different root priorities
E. multiple RRPP domains sharing the same ring
Question #2
Click the Exhibit button and view both exhibits.

You are configuring an HP A-Series switch so that the secure web traffic from the accounting, sales and development departments, is marked with 802.1p priorities 5, 3, and 4 respectively. Before you implement the following configuration, a peer reviewer informs you that there is an error in your configuration. Where in the configuration does this error reside?
A. classifier
B. policy
C. behavior
D. access-list
Question #3
Click the Exhibit button and view the three exhibits.


After you issue the command irf-port-configuration active on HP A5800 Switch members 4 and 5, the 10 Gigabit Ethernet link 1/0/25 is connected. What is the expected result? (Select two.)
A. IRF Members 3 and 5 reboot.
B. IRF Member 3 becomes the Master.
C. IRF Members 2 and 4 reboot.
D. IRF Member 5 becomes the Master.
E. IRF Member 2 becomes the Master.
F. Only IRF Member 5 reboots.
G. Only IRF Member 4 reboots.
Question #4
Click the Exhibit button and view the four exhibits.
You are replacing your Cisco distribution layer switches with HP E8212 zl switches. The Cisco switches have a VLAN map applied to VLAN 10 (subnet 10.1.10.0/24). The configuration for this VLAN map is as follows:
The exhibits display possible configurations for the HP ProVision ASIC-based E-Series switch.
Which configuration controls traffic that arrives on VLAN 10 in the same way that the current Cisco switches do?
A. Exhibit 3
B. Exhibit 1
C. Exhibit 2
D. Exhibit 4
Question #5
Click the Exhibit button and view both exhibits.

In the exhibits, you see the QoS-related configurations for two Cisco switches, one at the edge and one at the distribution layer. You want to replace the Cisco distribution switch with an HP E8212 zl switch (so that the edge switch connects to the HP switch instead). Which tasks do you need to perform on the HP switch so that it provides comparable support for the QoS solution as that provided by the Cisco distribution switch? (Select two.)
A. Enable QoS globally.
B. Configure the switch to select traffic according to its destination port and mark it with the correct DiffServ Code Point (DSCP).
C. Verify that all 802.1p values are mapped to the proper ToS values.
D. Configure the switch to tag VLAN 2 on all ports.
E. Set the QoS type of service mode to DiffServ.
Solutions:
| Question #1 Correct Answer: E | Question #2 Correct Answer: B | Question #3 Correct Answer: A,E | Question #4 Correct Answer: A | Question #5 Correct Answer: C,E |



PDF Version Demo
935 Customer Reviews



Quality and ValueITCertTest Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to PassIf you prepare for the exams using our ITCertTest testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before BuyITCertTest offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.