H3C GB0-371-ENU

In recent years, many people choose to take H3C GB0-371-ENU certification exam which can make you get the H3C certificate that is the passport to get a better job and get promotions.

How to prepare for H3C GB0-371-ENU exam and get the certificate? Please refer to H3C GB0-371-ENU exam questions and answers on ITCertTest.

ITCertTest is a good website that provides all candidates with the latest IT certification exam materials. ITCertTest will provide you with the exam questions and verified answers that reflect the actual exam. The H3C GB0-371-ENU exam dumps are developed by experienced IT Professionals. 99.9% of hit rate. Guarantee you success in your GB0-371-ENU exam with our exam materials.

Furthermore, we are constantly updating our GB0-371-ENU exam materials. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easy prepare for GB0-371-ENU exam and successfully pass your exam. You just need to spend you 20-30 hours on studying the exam dumps.

ITCertTest provides you not only with the best materials and also with excellent service. If you buy ITCertTest questions and answers, free update for one year is guaranteed. You fail, after you use our H3C GB0-371-ENU dumps, 100% guarantee to FULL REFUND. You just need to send the scanning copy of your examination report card to us. After confirming, we will refund you.

What's more, before you buy, you can try to use our free demo. We provide you some of H3C GB0-371-ENU exam questions and answers and you can download it for your reference.

ITCertTest is no doubt your best choice. Using the H3C GB0-371-ENU training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

Quick and easy: just two steps to finish your order. We will send your products to your mailbox by email, and then you can check your email and download the attachment.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. The following are core layer functions (choose one or more)

A) Access security control
B) Necessary routing strategy
C) Possess a large number of interfaces for connecting with end user computers
D) High-speed packet switching

2. In the network shown in the figure, the PIM SM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1 RT3 is connected to the receiver, and IGMP is enabled on the corresponding interface to view the unicast routing table in RT3 as follows:
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 10 Routes: 10
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.2.1 so/2/1
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, when the receiver (Receiver) sends a group join request, which of the following routers have (*, G) entries

A) RT1
B) RT3
C) RT2

3. GVRP is enabled on the switch SWA, and the Hold timer value is set to 100 centiseconds. Now you need to modify the value of other timers. The following configuration is correct

A) [SWA]garp timer leaveall 415
B) [SWA-Ethernet1/0/1]garptimer join 50
C) [SWA-Ethernet1/0/1]garptimer leave 400
D) [SWA-Ethernet1/0/1]garp timer join 200

4. The IP address of the host PCA is 40.1.1.1, and the MAC address is 0011.1111.1111. The PCA is connected to the GigabitEthernet1/0/1 port of the switch SWA. The following commands are configured on the switch SWA:
[SWA]vlan 10
[SWA-vlan10]quit
[SWA]vlan 20
[SWA-vlan20]protocol-vlan ipv4
[SWA-vlan20]quit
[SWA]vlan 30
[SWA-vlan30]quit
[SWA]mac-vlan mac-address 0011-1111-1111 vlan 30
[SWA]vlan 40
[SWA-vlan40]ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[SWA-vlan40]quit
[SWA]interface GigabitEthernet 1/0/1
[SWA-GigabitEthernet1/0/1]port link-type hybrid
[SWA-GigabitEthernet1/0/1]port hybrid pvid vlan 10
[SWA-GigabitEthernet1/0/1]port hybrid vlan 10 20 30 40 untagged
[SWA-GigabitEthernet1/0/1]port hybrid protocol-vlan vlan 20 0
[SWA-GigabitEthernet1/0/1]port hybrid ip-subnet-vlan vlan 40
[SWA-GigabitEthernet1/0/1]mac-vlan enable
[SWA-GigabitEthernet1/0/1]vlan precedence ip-subnet-vlan
After the configuration is complete, it can be judged that PCA will join

A) The configuration command is incorrect
B) VLAN30
C) VLAN 10
D) VLAN40
E) VLAN20

5. Which of the following statements about multicast VLAN is correct is

A) Multicast VLAN needs to enable IGMP-Snooping function
B) Multicast VLAN not only saves bandwidth, but also reduces the burden on Layer 3 devices
C) The sub-VLANs of the multicast VLAN must also enable the IGMP-Snooping function
D) The VLAN that the host belongs to needs to be configured as a sub-VLAN of the multicast VLAN

Solutions: