H3C GB0-391

In recent years, many people choose to take H3C GB0-391 certification exam which can make you get the H3C certificate that is the passport to get a better job and get promotions.

How to prepare for H3C GB0-391 exam and get the certificate? Please refer to H3C GB0-391 exam questions and answers on ITCertTest.

ITCertTest is a good website that provides all candidates with the latest IT certification exam materials. ITCertTest will provide you with the exam questions and verified answers that reflect the actual exam. The H3C GB0-391 exam dumps are developed by experienced IT Professionals. 99.9% of hit rate. Guarantee you success in your GB0-391 exam with our exam materials.

Furthermore, we are constantly updating our GB0-391 exam materials. We will provide our customers with the latest and the most accurate exam questions and answers that cover a comprehensive knowledge point, which will help you easy prepare for GB0-391 exam and successfully pass your exam. You just need to spend you 20-30 hours on studying the exam dumps.

ITCertTest provides you not only with the best materials and also with excellent service. If you buy ITCertTest questions and answers, free update for one year is guaranteed. You fail, after you use our H3C GB0-391 dumps, 100% guarantee to FULL REFUND. You just need to send the scanning copy of your examination report card to us. After confirming, we will refund you.

What's more, before you buy, you can try to use our free demo. We provide you some of H3C GB0-391 exam questions and answers and you can download it for your reference.

ITCertTest is no doubt your best choice. Using the H3C GB0-391 training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

Quick and easy: just two steps to finish your order. We will send your products to your mailbox by email, and then you can check your email and download the attachment.

H3C Constructing Secure optimized WANs v2.0 Sample Questions:

1. As shown in the figure, the configurations of the two security gateways are:
RTA
[RTA] ike peer 123
[RTA-ike-peer-123] pre-shared-ke simple 123
[RTA-ike-peer-123] remote-address 10.2.1.2
[RTA-ike-peer-123] local-address 10.2.1.1
[RTA-ike-peer- 123] quit
[RTA] ipsec proposal 1
[RTA -ipsec-proposal-1] quit
[RTA]acl number 3000
[RTA-acl-adv-3000] rule 0 permit ip source 10.1.1.0 0.0.0.255 destination 10.3.1.0 0.0.0.255
[RTA]ipsec polic 1 1 isakmp
[RTA-ipsec-polic-isakmp-1-1] securit acl 3000
[RTA-ipsec-polic-isakmp-1-1] ike-peer 123
[RTA-ipsec-polic-isakmp-1-1] proposal 1
[RTA-ipsec-polic-isakmp-1-1] quit
[RTA] interface Serial0/2/1
[RTA-Serial0/2/1] ip address 10.2.1.1 255.255.255.0
[RTA-Serial0/2/1] ipsec polic 1
[RTA] interface Ethernet 0/1/0
[RTA-Serial0/2/1] ip address 10.1.1.2 255.255.255.0
RTB:
[RTB] ike peer 123
[RTB-ike-peer-123] pre-shared-ke simple 123
[RTB-ike-peer-123] remote-address 10.2.1.1
[RTB-ike-peer-123] local-address 10.2.1.2
[RTB-ike-peer-123]quit
[RTB] ipsec proposal 1
[RTB-ipsec-proposal-1] quit
[RTB]acl number 3000
[RTB-acl-adv-3000] rule 0 permit ip source 10.1.1.0 0.0.0.255 destination 10.3.1.0.0.0.0.255
[RTB]ipsec polic 1 1 isakmp
[RTB-ipsec-polic-isakmp-1-1] securit acl 3000
[RTB-ipsec-polic-isakmp-1-1] ike-peer 123
[RTB-ipsec-polic-isakmp-1-1] proposal 1
[RTB -ipsec-polic-isakmp-1-1] quit
RTB] interface Serial0/2/1
[RTB-Serial0/2/1] ip address 10.2.1.2 255.255.255.0
[RTB-Serial0/2/1]]ipsec polic 1
[RTA] interface Ethernet 0/1/0
[RTA-Serial0/2/1] ip address 10.1.3.1 255.255.255.0
This shows that ______ .

A) either any party initiated SA negotiation can be successful
B) Only there from the RTA to RTB launch of SA negotiation can succeed
C) Only there from RTB to RTA launched the SA negotiation can succeed
D) any any party initiated SA negotiation can not succeed

2. Network security incident management needs to pay attention to the content of _____ .

A) mesh network equipment room fire
B) network network equipment in the room interrupted
C) network detects the envelope ARP virus
D) Net happened on network network attacks

3. Use the displa ike peer command to display the following information on the device, and you can know from this information ____ .
KE Peer: 123
exchange mode: aggressive on phase 1
pre-shared-ke simple 123
peer id tpe: name
peer ip address: 10.2.1.1
local ip address:
peer name: aaa
nat traversal: enable
dpd:

A) The name of the local security gateway during IKE negotiation is aaa
B) In the IKE negotiation negotiation mode in phase master mode
C) During the first phase of IKE negotiation, the initiator sends its name to the peer to identify its identity
D) is not configured for the local security gateway lP address, IKE local gateway negotiation lP address of the interface will use the security policy of the main lP address

4. The user wants to design an H.323 network and requires unified and centralized control of all call rights.Which of the following components is not necessary ?

A) terminating end
B) net off
C) MCU
D) network gatekeeper

5. The information displayed on the MSR router is as follows:
acl number 2000
rule 0 permit source 192.168.0.0 0.0.0.255
acl number 2002
rule 0 permit source 192.168.2.0 0.0.0.255
#
traffic classifier 2 operator and
if-match acl 2002
traffic classifier 1 operator and
if-match acl 2000
#
traffic behavior 2
queue af bandwidth pct 30
traffic behavior 1
queue ef bandwidth pct 30 cbs-ratio 25
#
qos polic test
classifier 1 behavior 1
classifier 2 behavior 2
#
interface GigabitEthernet0/1
port link-mode route
duplex full
speed 10
ip address 192.168.1.1 255.255.255.0
qos appl polic test outbound
When the traffic rate of the packets with the source addresses of 192.168.0.2 , 192.168.2.2 , and 192.168.3.2 are 4Mbps , 4Mbps , 6Mbps , and no other background traffic is forwarded from port G0/1_ .Then the following statement is incorrect is _____

A) The forwarding rate of packets with the source address of 192.168.0.2 is about 2.7Mbps
B) The forwarding rate of packets with the source address of 192.168.0.2 is about 3Mbps
C) The forwarding rate of packets with the source address of 192.168.2.2 is about 3Mbps
D) The forwarding rate of packets with the source address of 192.168.2.2 is about 4Mbps
E) The forwarding rate of packets with the source address of 192.168.2.2 is about 2.7Mbps
F) The forwarding rate of packets with the source address of 192.168.0.2 is about 4Mbps

Solutions: